Solar Thermal Storage Tank
The typical solar tank for a 4-person dwelling has about a 300-litre capacity. This tank has 2 heat exchangers. The top heat exchanger has an additional heating element. The lower heat exchanger contains the heat from the solar system. Warm water has a lower specific weight than cold water. Therefore the warm water will flow to the top of the tank. When more heat is required, the water from the solar loop has already been preheated and now requires about 40% less energy to reach the desired temperature because the water being used comes from the top of the tank.
The collectors are transferring their heat to the bottom of the tank. At this point, the heated water will rise and so more hot water can be stored at the top. The solar medium (propylene glycol) will transfer heat through the tube type heat exchanger into the tank.
The solar tank is made from steel and is glass lined. It is also well insulated. There are also tanks being used that are made from stainless steel. These are the best and most costly.
- Storage-water heater for domestic and industrial storage
- Suitable for any number of take-off points
- Simple retrofitting for modernization or use of solar energy
- Demand-related fitting of flange apertures
Combination options:
- electric screw-in radiator 1 to 6 kW circuit (Selectable)
- electric heating flange per flange dia. 210mm 2 to 12kW
- electric heating flange per flange dia. 280mm 6 to 36kW
- heat exchanger boiler, solar, or refridgerant operation
- CFC-free heat insulation with lowest possible heat loss
- SB 302 to 402 AC
- 50mm direct foam cladding
- SB 602 to 1002 AC
- 100mm foam heat insulation

ArcSolar Double Coil Storage Tanks
Technical Description
|
1.TANK |
|
Material
steel, steel quality no |
6837,
standard :DIN EN 10120 steel: P245NB |
|
Internal
coating |
Double
Enameling heated at 860 C (vitrified steel) |
|
Supplied
with |
Mg anode
for anti -corrosive protection |
|
Flange
|
for easy
interior cleaning |
| |
|
|
2.COIL |
|
|
Material |
Steel
plate ST 37.2 |
|
Coating |
Enameling (vitrified steel) |
| |
|
|
3.INSULATION MATERIAL |
|
|
Insulation material |
CFC free
from Polyurethane |
|
Polyurethane density |
40 kg/m3
, thickness: 50 mm |
|
Insulation material |
Foam
for capacities from 800L and 1000L |
|
4.PRESSURE |
|
|
Maximum
working pressure |
8 bar
|
|
Maximum
testing pressure |
12bar
|
|
Maximum
temperature |
85 C (
95C is possible ) |
| |
|
|
5.OPTIONAL HEATING ELEMENT |
|
|
Heating
element capacity |
From 2kw
to 12 kw |
| |
|
|
6.CASING |
|
|
Casing |
Special
type of material against firing. |
| |
|
Technical Data
|
Description |
300D |
300 DI |
400D |
500D |
800D |
1000D |
|
Water Volume (Lt) |
300 |
300 |
400 |
500 |
800 |
1000 |
|
Heat Transfer Area (sqm) (bottom) |
1,3 |
1,54 |
1,63 |
1,94 |
2,78 |
2,71 |
|
Heat Transfer Area (sqm) (upper) |
0,49 |
1,15 |
0,97 |
1,31 |
1,06 |
1,37 |
|
Total Heat Transfer Area (sqm) |
1,79 |
2,69 |
2,6 |
3,25 |
3,84 |
4,08 |
|
Height |
1210 |
1930 |
1560 |
1860 |
1960 |
2090 |
|
Diameter (inc. insulation) |
740 |
600 |
740 |
740 |
1000 |
1050 |
|
Cold Inlet |
85 |
85 |
85 |
85 |
125 |
190 |
|
Bottom coil cold |
280 |
241 |
280 |
280 |
350 |
420 |
|
Sensor case |
555 |
403 |
605 |
650 |
1035 |
1110 |
|
Bottom coil hot |
685 |
936 |
780 |
875 |
1250 |
1345 |
|
Service circulation |
875 |
1259 |
1225 |
1525 |
1525 |
1610 |
|
Hot water outlet |
1135 |
1720 |
1490 |
1785 |
1890 |
1985 |
|
Height of cleaning door |
320 |
- |
320 |
320 |
505 |
505 |
|
Cleaning door |
DN100 |
DN 125 |
DN100 |
DN100 |
DN250 |
DN250 |
|
Serpentine inlet diameter |
1'' |
1'' |
1'' |
1'' |
1'' |
1'' |
|
Serpentine outlet diameter |
1'' |
1'' |
1'' |
1'' |
1'' |
1'' |
|
Circuit inlet |
1'' |
1'' |
1'' |
1'' |
1'' |
1'' |
|
Diameter of hot water outlet |
1'' |
1'' |
1'' |
1'' |
1'' |
1'' |
|
Diameter of serv. circulation |
3/4'' |
3/4'' |
3/4'' |
3/4'' |
3/4'' |
3/4'' |
|
Weight |
109 |
127 |
178 |
202 |
261 |
295 |
|
Tank Thickness (mm) |
3.0 |
3.0 |
3.0 |
3.0 |
4.0 |
4.0 |
Download a copy of this
technical
data here.

Please
email us with your questions: |